3D file [3Dino Puzzle] Acrocanthosaurus・3D printing template to obtain・Cults

This can be a 3D puzzle set of “Acrocanthosaurus” that may be made with a 3D printer.
The restricted version design comes with a platform that includes conventional Japanese patterns similar to “Asanoha(hemp leaves)” and “Sakura(cherry blossoms).”

The next factors have been upgraded in comparison with the free mannequin.
・Replica of the minimize of the cranium
・Sternum and pelvis are sculpted.
・Element of ribs, backbone and tail vertebrae

This set comes with a brand new kind of platform. This platform is made in order that the dinosaur puzzle and signboard can rotate 360 levels. Regulate the angle freely to brighten.
The perimeters of the platform all have completely different shapes, so the way in which the pathway appears to be like will depend on how it’s positioned. In case you place a number of of them, you’ll be able to create your individual dinosaur museum.

[Do you want more 3Dinos?]
My account publishes 3D puzzles of dinosaurs and museums.
Verify this one out too!

🦖3Dino Puzzle Sequence↓
https://cults3d.com/en/design-collections/STAG-B/3dino-puzzle-series-free-model

🏛3D Puzzle Museum Sequence↓
https://cults3d.com/en/design-collections/STAG-B/3d-puzzle-museum-set-free-model

And, STAG.B gives greater than 35 completely different 3Dino puzzles!

🐞Please examine my website↓
https://3dprintingstag-b.com/en/contents/3dinopuzzle

When 3D printing, it’s handy to make use of packaged STL fashions with all components in a single package deal.
STL fashions can be found in two sorts: Common and Tight.
(Common applies to twenty~,40~ components/packages, Tight applies to 30~,50~)
For “Common”, a pitch of 0.2-0.3 mm and a “Tight” setting of 0.1 mm are appropriate. That is adjusted to match the floor roughness of the 3D printed half.
Relying on the maker of the filament, 3D printing with a setting of 0.1mm could also be too tight to assemble. In such a case, 3D print the tight components once more with the identical settings utilizing the “common” mannequin.

[Print Settings]
Rafts: No
Helps: No
Infill: 20%
Nozzle: 0.4mm
Filament: PLA
Advisable firm: RepRapper
Pitch(Layer peak): 0.1mm – 0.3mm
Print pace: 60mm/s
Journey Pace: 100mm/s

[3D Print Time]
{All}
Pitch 0.3mm: 4h49min
Pitch 0.1mm: 10h44min

{Acrocanthosaurus}
Pitch 0.3mm: 2h30min
Pitch 0.1mm: 5h11min

{Platform}
Pitch 0.3mm: 2h17min
Pitch 0.1mm: 5h31min