Roland D-05 Help 1.0 / Roland D-05 Help 1.0 (for Roland’s boutique)
Video: https://youtu.be/YGIVFr49RZI
3D Stand for Roland D-05. Design by CuevArt – George Cuevas Artwork with rights reserved. Appropriate for the Roland boutique whose modules have the next measures: 300 x 128 x 38mm and an approximate weight of 900 gr.
The stand consists of 4 elements for 3-D printing.
-Base rail 1 computer.
-Lateral helps 2 pcs.
-Transition base 1 unit
And 6 frequent elements with commonplace sizes that may be bought at any ironmongery store.
-Springs 80mm x 9.7 mm 2 pcs.
-Screws 30 mm x 4.7 mm 2 pcs.
-Nuts to the scale of the screws 2 pcs.
Assembled it weighs about 260 gr. It may be tailored to any 5/8 or 15.8 mm microphone stand thread and thus mounted on some other stand.
English
Roland D-05 help 1.0 (for Roland boutique)
3D help for Roland D-05. Design by CuevArt – George Cuevas Artwork, with all rights reserved. Appropriate for Roland’s module boutique witch have the next measures: 300 x 128 x 38mm and an approximate weight of 900 gr.
The help consists of 4 items for 3-D printing
-Rail base 1 unit
-Facet helps 2 items
-Transition base 1 unit
And 6 frequent items with commonplace measures that may be bought at any ironmongery store
-80mm x 9.7 mm springs 2 items
-30 mm x 4.7 mm screws 2 items
-Nuts for these screws 2 items.
Mounted weighs about 260 gr. It may be tailored to any 5/8 or 15.8 mm microphone stand thread and thus mounted on some other stand.
Suggestions for printing
-Print in PLA with temperature traits really helpful by the producer.
-Elements needs to be strong so the print shouldn’t have any lower than 75% infill.
-Will be printed in any shade of your liking.
-Rail base needs to be printed horizontally with backing materials and border on the primary layer for excellent adhesion to the mattress. Printing time about 13.3 hours
-Lateral helps needs to be printed with their lengthy axis vertically, utilizing border on the primary layer. No help materials required. Printing time about 15 hours
-The transition base needs to be printed with its lengthy axis horizontal and the opening for the microphone adapter dealing with up. Use border on the primary layer for excellent adhesion to the mattress. Printing time about 4.2 hours
-All prints needs to be strong (75% fill) and high quality end.
-recommended infill sample Zig Zag
-Any future modifications to this sample could also be downloaded freed from cost for many who have bought the present sample.
English
Printing suggestions
-Print in PLA with the temperature traits really helpful by the producer
-The items should be strong so the print will need to have a filling of at least 75%.
-Will be printed in any shade of your liking
-The Rail base should be printed horizontally with help materials and use edge within the first layer for excellent adhesion to the mattress. Printing time about 13,3 hours
-Facet helps needs to be printed with their lengthy axis vertically, utilizing skirt. No help materials required. Use edge within the first layer for excellent adhesion to the mattress. Printing time about 15 hours
-The transition base needs to be printed with its lengthy axis horizontally and the opening for the microphone adapter dealing with up. Use edge within the first layer for excellent adhesion to the mattress. Printing time about 4,2 hours
-All prints should be strong (75% crammed) and fine-finished
-Really useful infill sample Zig Zag
-Any future modification of this mannequin could be downloaded freed from cost for many who have bought the present mannequin.
