Launched in July 2023, the DJI Air 3 has rapidly turn out to be a favourite drone amongst seasoned drone operators, content material creators, and everybody in between.
One doesn’t must go too far on-line (whether or not social media or YouTube) to see examples of the superb footage and movies the Air 3 has been capturing not too long ago.
This text and the included YouTube video will focus on why an Air 3 proprietor could need to join the Air 3 to a pc and also will function a step-by-step information strolling by means of connecting the DJI Air 3 to a Home windows-based pc or a Mac.
High Drone Programs
Why Join the Air 3 to a Laptop?
Though many Air 3 homeowners could by no means have an rapid want to join their Air 3 to a pc, there are two most important explanation why somebody would need to achieve this, these are:
- To switch movies and/or pictures to a pc
- To entry the DJI Assistant 2 (Client Drones Sequence) software program
DJI Assistant 2 Software program (Client Drone Sequence)
As talked about, though not a right away want simply but, because the Air 3 simply launched, there shall be Air 3 homeowners who might want to join the Air 3 to their computer systems to entry options and utilities discovered throughout the DJI Assistant 2 (Client Drone Sequence) software program.
The DJI Assistant 2 (Client Drone Sequence) software program is used to:
- Calibrate the Air 3‘s imaginative and prescient sensors
- Entry Air 3 flight information
- Replace the Air 3 firmware
- Roll-back firmware variations (when/if this feature is offered)
As soon as the Air 3 is linked to your Home windows PC or Mac, you should use the DJI Assistant 2 (Client Drone Sequence) software program to carry out the aforementioned capabilities.
Word: In the event you at the moment have the DJI Assistant 2 software program for a Mini 3, or Air 2S, these variations usually are not appropriate with the Air 3. You will want to obtain and set up the DJI Assistant 2 software program from the Air 3 downloads web page.
Shortly, we shall be strolling by means of connecting the Air 3 to a pc.
Switch Images and Movies
The twin-camera Air 3 is understood to take glorious footage and movies.
The cameras on the Air 3 (each the wide-angle 24mm and 70mm tele lens) take footage in the very same decision, each taking 48MP pictures.
Likewise, each cameras on the Air 3 shoot as much as 4k 100fps. As well as, footage will also be shot within the D-Log M, 10-bit coloration profile, in addition to a 10-bit HDR profile (HLG).
The query on many new Air 3 homeowners’ minds is “How do I entry all of this content material”?
SD Card Readers
A helpful technique for accessing the content material (footage and movies) on an Air 3’s exterior SD card is thru using an SD card reader.
An SD card reader lets you take away the SD card from the Air 3, insert the cardboard into the reader, plug the reader into a pc, after which view and edit the data immediately from inside a listing in your pc.
For many who do a whole lot of picture and video modifying, this fashion of accessing the data on the SD card is handy, as you’ll not must discover a spot in your work space to accommodate the Air 3 after which plug it into the pc through USB-C cable.
Our Choose
SD Card Reader, Beikell Twin Connector USB-C
USB 3.0 Reminiscence Card Reader Adapter – Helps SD/Micro SD/MMC/SDXC/SDHC/Micro SDHC Suitable with MacBook Professional, MacBook Air, Galaxy S21, S22
We earn a fee when you make a purchase order, at no extra value to you.
09/08/2023 09:41 am GMT
Immediately Connecting to a Laptop (PC or Mac)
Though there are alternative routes to entry pictures and movies from the Air 3 as talked about, it nonetheless is likely to be essential to immediately join the Air 3 to a pc, corresponding to when footage and movies have been saved on to the inner 8.6 GB storage discovered onboard the Air 3.
To attach your Air 3 to a PC or Mac:
You’ll want the USB to USB-C cable that’s included with the Air 3. Fortunately, this time round, DJI has USB-C cables included in all the Air 3 combos, together with the Air 3 and RC-N2 solely combo.
Step 1: Join the Air 3 USB to USB-C cable to your PC or Mac. You’ll need to plug the USB aspect into an empty USB slot in your pc.
Step 2: Whereas the Air 3 is off, plug the USB-C finish into the Air 3.
If connecting the Air 3 to a pc to entry footage and video:
Step 3: Not like earlier DJI drones, there isn’t any must energy on the Air 3, as when it connects to the pc through USB-C, the internals are accessible.
Your pc, whether or not Home windows PC or Mac, ought to acknowledge the Air 3 storage.
If utilizing a Mac, the Air 3’s inner drive will create a shortcut on the desktop, which it is possible for you to to double-click and entry by means of Mac Finder.
If in case you have an SD card within the Air 3, this may also be created as a shortcut on the desktop.
If utilizing a Home windows PC, you’ll have to entry the info on the Air 3’s SD card or the Air 3’s inner storage and SD card by means of both Home windows or File Explorer, relying on which model of Home windows you might be operating.
If connecting the Air 3 to a pc to work with the DJI Assistant 2 (Client Drone Sequence) software program:
After following the aforementioned Steps 1 & 2
Step 3: Launch the DJI Assistant 2 software program
Step 4: Unfold the Air 3’s legs and arms. Take away the gimbal cowl after which activate the Air 3 by urgent the facility button as soon as, after which holding the facility button.
Your pc, whether or not Home windows PC or Mac, ought to acknowledge the Air 3 storage as effectively.
Step 5: The DJI Assistant 2 software program will then transition to a display screen that exhibits your Air 3. Merely select it after which it is possible for you to to replace firmware, in addition to different choices and utilities.
Connecting the DJI RC2 (or RC-N2) Distant Controller to a pc
Like with the Air 3, it might turn out to be mandatory to attach the DJI RC2 or RC-N2 distant controller to your PC or Mac to work with the firmware within the DJI Assistant 2 software program.
- Step 1: Join the Air 3’s USB to USB-C cable to your PC or Mac by plugging the USB aspect into an empty USB slot in your pc or USB hub.
- Step 2: Whereas the distant controller is off, plug the USB-C finish into the RC.
- Step 3: Open the DJI Assistant 2 software program.
- Step 4: Log in to the DJI Software program utilizing your DJI account credentials.
- Step 5: Activate the RC by single urgent the facility button as soon as, then press and maintain the facility once more till the RC beeps and activates.
The DJI Assitant software program will then see the distant controller and swap over to the linked units display screen.
- Step 6: Select the distant controller mannequin that you’re utilizing and you can be dropped at the Firmware Replace display screen.
