Turning all hidden-geometry-dotted strains into strong strains directly – Professional

Hiya,
I’m on the lookout for a manner for dotted hidden geometry strains to be proven as strong strains.
I found that I can “merely” choose my object, right-click and choose “present”.
However workflow-wise I can not do that with all objects… it’ll take too lengthy.
I imported the cupboards from one other program. All of the toes of the cupboards belong to the hidden geometry and are subsequently dotted strains. Since I usually import at the least 10 cabinats á 4 toes for a undertaking, it’s an excessive amount of work to single-click on each foot. Is there a strategy to present all dotted strains as strong strains directly?
Thanks quite a bit prematurely in your assist!

Hooked up is my sketch up file. The one entrance proper foot on the suitable is how I would like it to be.

Check.skp (675.8 KB)

Proper click on on group/teams > Deep Choose > Edge … Unhide

What different program and why do the toes and drawers are available with hidden edges?

Don’t overlook to repair the inaccurate tag utilization. The perimeters AND faces must be untagged in SketchUp.

Do you import the identical cupboards in your initiatives or are they at all times {custom} cupboards. If this cupboard, for instance, might be reused, when you’ve cleaned it up, it might be a good suggestion to reserve it as a part in a neighborhood assortment so that you don’t have to wash it up the subsequent time you wish to use it.

Thanks for the short reply + video!
After I proper click on I don’t have the choice to “deep choose”… There have to be one thing improper with my setup?

I take advantage of the German program “Horatec” which has the chance to export to SketchUp.
All cupboards are custom-made and subsequently I barely use the very same one twice.

Nothing is improper… Deep choose is an Extension:

Curic Deep Choose | SketchUp Extension Warehouse

Set up it then you should have that context menu.

Possibly it has a setting to export the information with out the hidden edges.

Thanks soo a lot, I received it! That is the primary time asking a query within the SketchUp discussion board and I’m tremendous grateful in your assist!

That’s doable, sadly this system doesn’t permit to edit the export choices.

That’s unlucky. From what I can see in your mannequin it is likely to be extra environment friendly to simply make the mannequin in SketchUp utilizing parts.

Good luck with it, although.

There may be some very poor geometry in that mannequin.