To make the Walknsaill Avatar HD digital FPV system, much more engaging, CaddxFPV launched three new appropriate gimbals. The GM stabilizer sequence are appropriate with 19mm Avatar HD FPV cameras and Walksnail VTXs. Paired with the Walksnail Goggles X permits head monitoring (the digicam follows the motion of your head).
Regardless of if you’re utilizing an FPV drone, RC FPV Wing, or RC automotive, CADDXFPV GM gimbal sequence supplies the proper answer to acquire stabilized footage. Whether or not you’re an expert pilot or an beginner fanatic, The flexibleness of CADDXFPV gimbals ensures they’ll meet the calls for of any FPV utility.
The GM1 presents one-axis stabilization, the GM2 two-axis, and probably the most superior GM3 tri-axis. All three CaddxFPV GM gimbals will be managed through PWM and UART alerts.
All three Walksnail gimbals are meant to be tender mounted and will be powered from 7 to 26V (2-6S LIPOs).
CaddxFPV GM1 vs GM3 vs GM3 comparability desk
The GM1 gimbal has just one motor permitting solely minor stabilization and distant tilt angle adjustment. The GM2 has two motors and permits higher stabilization. The GM3 has three motors, and stabilize on all axis offering super-smooth footage.
CaddxFPV GM1 | CaddxFPV GM2 | CaddxFPV GM3 | |
Digital camera Compatibility | 19mm FPV Digital camera | 19mm FPV Digital camera | 19mm FPV Digital camera |
Variety of axis | one (tilt) | two (tilt and roll) | three (tilt, roll, and pan) |
Picture Stabilization | ±0.005° | ±0.005° | ±0.005° |
Max Controllable Pace | ±1500°/s | ±1500°/s | ±1500°/s |
Max Managed Rotational Vary pitch: | ±120° | Pitch: ±120° Roll: ±60° |
Pitch: ±120° Roll: ±60° Yaw: ±160° |
Management mode | PWM/UART | PWM/UART | PWM/UART |
Enter voltage | 7~26V | 7~26V | 7~26V |
Energy utilization | 1.0W | 1.2W | 1.5W |
Measurement | 32.2×38.1×20.5mm | 32.2×38.1×20.5mm | 32.2×38.1×20.5mm |
Weight | 16g | 30g | 46g |
Value | $54.99 | $69.99 | $144.99 |