Most likely everybody into 3D printing passion has already heard concerning the Chitubox slicing program. Nonetheless, on this assessment, we’ll give attention to the corporate’s ChiTu JAMG HE Conjure PLA+ and Hello-Pace PLA Pus 3D filaments, which I had not heard till just a few weeks in the past.
To get the most effective out of our 3D-printed fashions, you should discover the right stability between high quality and velocity. Printing velocity is measured in mm/s and represents how briskly the nozzle strikes throughout the construct plate. Primarily based on my expertise, gradual printing speeds produce higher high quality outcomes than excessive speeds when under-extrusion can happen. Normal PLA filaments are really helpful for use at 50-100mm/s. The Conjure PLA+ claims to be usable at as much as 300mm/s and the HS PLA+ at as much as 600mm/s.
These days, 3D printer producers promise loopy printing speeds, however the machine can attain that velocity solely throughout touring strikes. You possibly can learn advertising and marketing slogans like “Print 10X sooner!” on printers that may print at 500mm/s. In the true world, a 500mm/s may end the job only one.5-4 occasions sooner than a 50mm/s. 3D printing at excessive speeds solely turns into “worthwhile” if you happen to print giant fashions. The warming time of a 3D machine, no matter printing velocity, is from a couple of minutes to 1 / 4 of an hour or much more, relying on the dimensions of the printed and heating energy.
Conjure JAMG HE 3D filaments assessment
Disclosure: I obtained these high-speed 3D filaments in a product assessment collaboration with ChiTuSystems. Product specs and high quality might range based on the producer’s reliability, so I can’t assure that you’ll get the fabric that performs the identical as seen in my article.
Final month, ChiTu despatched me eight spools of their high-speed prepared JAMG HE 3D filaments (4x PLA+ and 4x HS PLA+). Each sorts had been packed in the identical form of recycled cardboard field. ChitTu additionally opted for environment-friendly cardboard spoolers. Appropriately, the filaments had been in hermetic vacuum luggage with small silica gel sachets inside. Printing nozzle temperature, shade, and manufacturing date are labeled on the bobbin. An unopened spool weighs round 1180 grams. Earlier than use, it is strongly recommended to scale your filament and word it so you possibly can know the load of the naked spool to calculate the remaining filament anytime.
I obtained White, Gray, Orange, Pink, and Inexperienced filaments. All have a good looking shade, pleasing to the eyes. The gray one has a pleasant metallic look. The diameter tolerance of the filaments is +/- 0.02 mm. Throughout my exams, I had no subject with spool tangling or unwinding.
To check these Conjure PLA filaments, I used my high-speed Elegoo Neptune 4 Max printer, which is able to printing as much as 500mm/s and accelerating as much as 8000mm/s. In addition to reliability, one other downside with HS printers is that they’re rattling loud. When it really works in a single day, I hear it by way of partitions and closed doorways within the condominium. Anyway, once I print large designs that require 30-40 hours, I sleep like a rabbit, not due to the noise however due to the concern of print failure at 99%.
Testing the ChiTu Programs Conjure 3D filaments
Firstly, I examined the purple HS PLA+ filament, printing just a few compliant mechanism blasters. I began with 50mm/s, then 250mm/s, and lastly, 500mm/s. All printed effectively, and the standard was degraded little or no. I used 220℃ nozzle temperature at low velocity and 230℃ for prime velocity.
Secondly, I opened the gray Conjure Excessive-Pace PLA+ and ready the Mandalorian Helmet, which requires 925 grams of fabric and 32 hours to print if adequately sliced. With out helps, it wants 746 grams and 24 hours to print, respectively, with inventory help settings, 1768 grams of filament, and 47 hours of job time. Sadly, the print failed after seven hours on the primary try as a result of filament’s high quality downside. It was thicker on a portion of 5 mm (see photograph under). It managed to undergo the filament run-out sensor however caught into the extruder.
I began the second try with my coronary heart in my mouth. Fortunately, this time labored completely until the top. After I may supervise the printer, I set 250mm/s mode, and once I slept or went to work, I printed at 100mm/s to scale back the prospect of failure. The helmet got here out amazingly with glorious and uniform layer adhesion; it simply wants slightly sanding and portray. The helmet’s ears needed to be printed individually. Only some windings had been left on the bobbin once I completed them.
I examined the usual PLA+ solely at regular velocity (100mm/s) utilizing 210℃ nozzle temperature. The filament performs effectively with none points. When the time lets me, I may also take a look at it at increased temperatures (260-280℃), the place I ought to have the ability to print it at increased speeds (200-300mm/s). Sadly, with funds printers that may attain solely 250-260℃ nozzle hotness, you possibly can’t print at excessive velocity with JAMG HE PLA+ filaments.
The stringing take a look at print did produce an excellent end result with just a few skinny strings. Each Conjure filaments adhere effectively to the heated PEI sheet (60°C). The fashions didn’t pop off even after the print mattress cooled down. I did NOT really feel any odors throughout use.
Pricing, availability, and shade choices
After I printed my assessment, the PLA Plus filament was accessible in packs of 1 or three spools ranging from $15.99 with 9 shade choices (Blue, Inexperienced, Orange, Pink, Silver, Yellow, Gray, White, Pores and skin, and Black). The Excessive-Pace PLA+ could be ordered for $17.99/roll or $52.99/3 rolls, and you too can select from 9 colours. You possibly can go for China, USA, EU (together with UK), or Australia warehouses. Chitu Programs Conjure filaments can be ordered from Amazon.
Conjure Hello-Pace PLA highlights
- [Faster Printing] Specifically designed to permit sooner print speeds than common PLA. The filament can transfer shortly by way of the printer, permitting quick and environment friendly printing. The Conjure HS PLA+ helps as much as 600mm/s quick printing velocity. It’s suitable with Elegoo Neptune 4 Professional / Plus / Max, Bambu Lab P1P / X1 / X1C, AnkerMake M5, Creality K1 / K1 Max, Voron 2.4, FLSUN V400 / T1 / S1, Prusa, UltiMaker, MK3, Ender 3, MakerBot, Flashforge, Raise3D, and different HS 3D machines.
- [Standard PLA temperature] Doesn’t require excessive nozzle temperatures. It may be used with normal (210-230℃) temperature settings no matter print velocity.
- [Improved Layer Adhesion] Excessive-speed PLA 3d printing filament usually displays higher layer adhesion than common PLA. This implies the printed layers adhere extra strongly to one another, leading to stronger and extra sturdy prints.
- [Increased Strength] HS PLA filament sometimes has improved mechanical properties, together with elevated energy and influence resistance. This makes it appropriate for functions that require strong and sturdy prints.
- [Stronger toughness] Excessive energy, robust rigidity, not straightforward to interrupt.
- [Soft and colorful colors] Conjure HI-Pace PLA+ is obtainable in 9 colours, that are heat and comfortable.
- [Environmental protection] For environmental safety, we use paper trays. Non-toxic and biodegradable.
Conjure HS PLA+: Technical specs
Mechanical proprieties | |
Dimensional Accuracy | +/- 0.02mm |
Elongation at Break | 19.59±10% |
Flexural modulus of elasticity | 2275±10% (MPa) |
Tensile energy | 40.4±10% (MPa) |
Most bending energy | 72±10% (MPa) |
Izod notched influence energy | 183±10% (J/m) |
Warmth distortion temperature | 54ºC (0.45MPa) |
Density | 1.23~1.31 g/cm3(25℃) |
Soften index | 10.68g/10min (190℃, 2.16Kg) |
3D printing parameters | |
Extruder Temperature | 200 -230ºC |
Plate temperature | 55-60℃ |
Printing velocity | 50-450mm/s |
Base plate | Glass/Carbon fiber, glued or 3M blue textured paper |
Cooling fan | 100% |
Conjure PLA+ highlights
- [Improved Printability] PLA+ filament usually has improved printability traits in comparison with common PLA. It displays higher layer adhesion, lowering the chance of delamination or splitting between printed layers. This leads to stronger and extra dependable prints with fewer structural flaws.
- [Dual-Temperature modes] Use 190-220℃ for 30-60mm/s or 260-280℃ for 200-300mm/s printing speeds.
- [Neatly Wound, Less Tangle] Full mechanical winding and strict handbook inspection cut back tangles, snap, and line breakage points.
- [Smooth printing] Conjure PLA+ has low shrinkage, much less warping, and low odor and is straightforward to print.
- [Soft and colorful colors] Conjure PLA+ is obtainable in 9 colours, that are heat and comfortable.
- [Environmental protection] For environmental safety, we use paper trays. Non-toxic and biodegradable.
Conjure PLA+: Technical specs
Mechanical proprieties | |
Dimensional Accuracy | +/- 0.02mm |
Elongation at Break | 21.5±10% |
Flexural modulus of elasticity | 1925±10% (MPa) |
Tensile energy | 62±10% (MPa) |
Most bending energy | 76±10% (MPa) |
Izod notched influence energy | 6±10% (J/m) |
Warmth distortion temperature | 54ºC(0.45MPa) |
Density | 1.23~1.25 g/cm3 (25℃) |
Soften index | 5.5g/10min (190℃, 2.16Kg) |
3D printing parameters | |
Extruder Temperature | 190-220℃ for 30-60mm/s 260-280℃ for 200-300mm/s |
Plate temperature | 55-60℃ |
Printing velocity | 30-60mm/s at 190-220℃ 200-300mm/s at 260-280℃ |
Base plate | Glass/Carbon fiber, glued or 3M blue textured paper |
Cooling fan | 100% |
ChiTu Programs Conjure Hello-Pace PLA alternate options
Whereas most 3D filaments provide PLA and PLA+ filaments, just a few have devoted “Excessive-Pace PLA” filaments. ESUN’s ePLA-HS (high-speed PLA) could be printed with as much as 300-500mm/s (relying in your 3D machine), however the first layers have to be extruded at 50mm/s. The ePLA-HS is obtainable solely in 5 colours and is priced at $18.99/kg.
The Raise3D Hyper Pace PLA is obtainable for $36/spool in seven colours and helps speeds between 50 and 300mm/s.
Priced at solely $14.99/kg, Elegoo’s Speedy PLA Plus filament is a funds various to the Conjure HS PLA+. You possibly can select from 9 colours and print from 30 to 600 mm/s.