Within the quickly evolving world of transportable charger, the ISDT 608PD emerges as a noteworthy contender. This compact USB-C succesful LiPo charger, although small in measurement, packs a strong punch, able to charging 6S LiPo batteries as much as 200W. On this evaluation, I’ll delve into the 608PD’s spectacular specs and design, whereas additionally highlighting some limitations to contemplate earlier than making your buy determination.
For these new to FPV, I like to recommend testing my complete information on LiPo chargers for FPV drones: https://oscarliang.com/choose-lipo-battery-charger-power-supply/
The place to Purchase?
You will discover the ISDT 608PD at these retailers:
Unboxing the ISDT 608PD, you’ll discover it in a simple bundle accompanied by an instruction handbook, with no extra equipment included.
Specs
- Most Enter Present: 10A on DC, 5A on USB-C
- Enter Voltage Vary: DC 5-30V, USB-C 5-28V
- Output Voltage Vary: DC 3.0~30V (ideally suited for as much as 6S LiPo/Li-ion)
- Charging Present: 0.5-10.0A
- Most Charging Energy: 240W on DC, 140W on USB-C
- Most Discharge Energy: USB-C 100W/5A
- Supported Battery Varieties and Sequence: LiFe, LiPo, LiHv (4.35V~4.50V) 1-6S, Pb 1-12S, NiMH 1-16S
- Steadiness Present: 0.8A/Cell Max
- Working Temperature: 0~40℃
- Storage Temperature: -20~60℃
- Dimensions: 72.5×60×26.6mm
- Weight: 85g
Design
Upon first dealing with the ISDT 608PD, its strong construct high quality is instantly obvious. Designed for comfort, it suits comfortably in your hand, being solely barely bigger than different transportable chargers just like the ToolkitRC M4 Professional (on the left), and the SkyRC B6 Neo (on the fitting).
The machine contains a sizeable shade display screen and three buttons for navigating by menus. The display screen boasts a high-contrast IPS show, making certain clear visibility even in direct daylight, with adjustable brightness to go well with numerous lighting circumstances.
Moreover, the 608PD is provided with an inside fan flanked by venting on both facet, which retains the unit cool throughout operation. The fan noise, even at full pace, stays inside an appropriate vary.
Connectors
The ISDT 608PD options XT60 and USB-C connectors for energy enter, accommodating a spread of energy sources.
On the output facet, there’s an XT60 and a 6S appropriate stability port, permitting you to cost LiPo batteries starting from 1S to 6S. Nonetheless, the absence of an XT30 connector is noticeable. For those who incessantly cost smaller batteries, you would possibly must spend money on an adapter, which is a slight inconvenience.
Person Interface
Navigating the 608PD’s menu is kind of a breeze. The display screen is obvious and readable, and the menu format is intuitive and user-friendly. I admire iSDT’s determination to make use of bodily buttons for navigation, which simplifies the method. Though the menu operation and parameter changes differ from different good chargers, requiring a while to get used to, this isn’t a significant impediment. Later on this evaluation, I’ll speak extra about function this charger in larger element.
The charger can retailer as much as 5 profiles for numerous charging settings. This function is especially helpful in the event you usually cost differing kinds and sizes of batteries.
Moreover, whereas charging, it shows particular person cell voltages and inside resistance, identical to the full-size good chargers.
ISDT Hyperlink APP
A standout function of the 608PD is the ISDT Hyperlink App, accessible by way of smartphones. This app permits distant monitoring and management of the charger by Bluetooth. You may view particular person cell voltages, cease and begin charging, and modify settings like battery chemistry, cell rely, and cost vary.
It gives a extra handy strategy to configure charger profiles in comparison with doing it straight on the charger. Options like adjusting display screen brightness and beeping are unique to the app and never obtainable within the charger’s menu.
The app additionally permits for voltage calibration.
USB-C Output Characteristic
An modern facet of the 608PD is its capability to rework a linked LiPo battery right into a USB-C energy supply. This performance successfully turns the charger into a conveyable energy financial institution – excellent for charging units like telephones, tablets and GoPros within the discipline.
How does it work?
Join a LiPo battery to the Output XT60 and stability port. Maintain down the middle button to activate USB Out mode. You may be prompted to set the bottom cell voltage to keep away from over-discharging – a commendable security function.
Then Plug within the machine you want to cost within the USB-C Port. You may monitor the cost present, and mah charged on display screen.
Voltage Checker
The 608PD doubles as a voltage checker. Merely plug within the stability lead, and it shows the cell voltages.
Downsides and Limitations
It’s necessary to notice that the iSDT 608PD lacks discharge and storage capabilities. Relying in your charging wants, this could possibly be a big downside.
Testing
Voltage Accuracy
I examined the charger’s accuracy with a calibrated multimeter. The outcomes have been passable, exhibiting nice consistency between the charger’s readings and the digital multimeter.
| Supply | Charger Report | DDM |
|---|---|---|
| Enter XT60 | 23.2 | 23.17 |
| Output XT60 | 23.2 | 23.17 |
| Cell 1 | 3.86 | 3.862 |
| Cell 2 | 3.86 | 3.861 |
| Cell 3 | 3.85 | 3.855 |
| Cell 4 | 3.85 | 3.861 |
| Cell 5 | 3.86 | 3.860 |
| Cell 6 | 3.85 | 3.860 |
Energy
When powered by way of DC by the XT60, the charger efficiently delivered over 200W of charging energy.
Utilizing a 65W USB-C adapter, the charger pulled round 60W. Whereas I couldn’t take a look at its 100W declare resulting from an absence of a extra highly effective adapter, for me personally it’s greater than sufficient as a journey charger.
The temperature-controlled cooling system is environment friendly, with the fan activating at round 60°C. Though barely loud at full pace, it successfully reduces the temperature and quiets down because the charger cools, ultimately the fan turning off at 40°C.
Tips on how to Use?
Right here’s the offered handbook. Let me information you thru the method of utilizing the ISDT 608PD Charger.
Firstly, energy up the charger. You’ll be prompted to set a low voltage restrict, that is to keep away from over-discharging if you’re utilizing a battery as energy supply. You may both choose a worth manually or wait a couple of seconds for the dialog to vanish, which can then choose the default worth displayed on the display screen.
Subsequent, join the battery you want to cost to each the XT60 and stability port.
To pick out a charger profile, merely press the middle button. You may then flick thru totally different profiles utilizing the left and proper buttons.
If you wish to modify parameters throughout the present profile, maintain down the middle button, and use the left/proper buttons to decide on a brand new worth. Press the middle button once more to vary the following parameter. When you’re carried out adjusting, maintain down the middle button to exit the profile adjustment mode.
Whenever you’re prepared to begin charging, press the middle button.
Throughout charging, you possibly can press the left/proper buttons to view the person cell voltages and inside resistance (IR).
To regulate the cost present whereas charging, maintain down the middle button.
To cease charging, shortly double-press the middle button.
Tips on how to Calibrate Voltage
To calibrate the stability port voltages, use the ISDT Hyperlink Smartphone APP. Begin by checking the person cell voltages of a 6S battery with a calibrated multimeter. Then, join the battery to the 608PD charger. Enter the voltages you famous earlier within the app underneath “Voltage Calibration.”
Conclusion
Priced at round $30, the ISDT 608PD Charger is a compelling purchase. Its user-friendly interface, compact design, and ISDT Hyperlink App make it a pretty possibility for a lot of customers. Nonetheless, the shortage of storage and discharge modes, in addition to the absense of an XT30 output connector, could possibly be deal breaker for some.
You should purchase the ISDT 608PD charger from the next distributors:
So, do I like to recommend the iSDT 608PD? For those who by no means use storage/discharge features, then the 608PD is a wonderful selection. Nonetheless, if these options are important, think about the SkyRC B6 Neo as an alternative. For many who primarily cost 4S or smaller LiPo batteries, the ToolkitRC M4 Pocket is one other nice possibility, providing each XT30 and XT60 connectors.
