The thrill round ExpressLRS Gemini Mode is plain, but there’s a scarcity of true range receivers in the marketplace that assist this superior characteristic. Enter the RadioMaster RP4TD – marking a big improve from its predecessor, the RP3, which solely supplied antenna range. Let’s dive in to see what it affords.
Study extra about ExpressLRS in our complete tutorial: https://oscarliang.com/setup-expresslrs-2-4ghz/
What’s Gemini Mode? https://oscarliang.com/expresslrs-gemini/
The place to Purchase?
Get the RP4TD Receiver from these distributors:
The package deal features a set of silicone wires for connecting to the flight controller, and three items of clear warmth shrink, enhancing the sturdiness of the setup.
Technical Specs
- MCU: ESP32
- RF Chip: Twin SX1281
- Antenna: Twin 65mm 2.4GHz T Antennas
- Frequency Vary: 2.4GHz
- Most Refresh Price: 500Hz / F1000Hz
- Telemetry RF Energy: Max 100mW (x2)
- Working Voltage: DC 4.5-12.0V
- Weight: 1.4g (excluding antennas)
- Dimensions: 23.7×16.3×4.0mm
- Pre-installed Firmware: ExpressLRS V3.3.0
- Firmware Goal: RadioMaster RP4TD 2400 RX
- Bus Interface: CRSF
- Prolong Interface: UART
The standout characteristic of the RP4TD is its two separate SX1281 RF chips and TCXO (Temperature Compensated Crystal Oscillators). This design means the receiver is healthier outfitted to deal with a variety of temperatures and difficult environments. With twin RF chips, the RP4TD affords two telemetry outputs at 100mW every, a big improve for lengthy vary flying. For these trying to push the bounds of two.4GHz FPV flying, this receiver looks like a really perfect alternative.
Construct High quality
The receiver itself is compact and well-built.
The highest facet incorporates a boot button and two U.FL connectors for the antennas. The 4 soldering pads are accessible on each side of the receiver with clear labels: 5V, GND, RX and TX.
Though the RP4TD is notably bigger than single-antenna EP1 receivers as a consequence of its twin RF chains, the design stays impressively compact.
Nevertheless, the inclusion of longer antennas might have enhanced its attraction for bigger builds, comparable to 7″ or 10″ drones. Nonetheless, prolonged antenna wires are available for these in want:
95mm / 120mm / 240mm antenna:
Set up
Putting in the RP4TD is as easy as any ExpressLRS receiver. The bottom line is to make sure optimum antenna placement. To make sure the very best reception, positioning the antennas to keep away from getting blocked simultaneous by any a part of the quadcopter is essential. This separation is important for sustaining a constant and dependable connection.
Conclusion: Is the RP4TD Proper for You?
Be aware that true range doesn’t needed enhance vary however supposed to boosts reliability and hyperlink high quality, notably with Gemini mode enabled.
The RadioMaster RP4TD Variety ELRS Receiver is a big improve for FPV pilots looking for the utmost in reliability and efficiency. Its dual-chip design and sturdy construct make it a best choice for demanding flight circumstances.
Get the RP4TD Receiver from these distributors:
For these constructing bigger drones, think about getting some longer antennas for the very best setup. For many who push their FPV flying to the extremes, the RP4TD is a worthy funding, making certain that your drone stays in fixed, dependable communication along with your transmitter.
95mm / 120mm / 240mm antenna:
