?
Creation high quality:
5.0/5
(1 votevotes)
Analysis of members on the printability, utility, stage of element, and many others.
Your ranking:
0/5
Your ranking:
0/5
Designer
3D mannequin description
I struggled to get my 70 mm LX (often known as Lanxiang/Bananahobby) F-35 flying properly with 70 mm followers. The intakes and exhaust had been large enough to deal with extra air so I designed a 75 mm fan for it as a substitute. It really works rather well. It is not quick however performs properly with good climb.
I take advantage of the fan with a gold and black coloured QF 2827 3500 kv motor and 4S lipo. I believe it attracts a bit greater than 80 A on a full cost. This motor is offered in 2600 kv for 6S however I have not tried that myself. Grind a divet on the motor shaft for the grub screw to sit down in in order that it could possibly’t simply slide off the shaft if it turns into barely free.
To stability my F-35 with a light-weight battery I made the elements in order that the fan itself sits in entrance of the conventional mounting location within the LX F-35. Stack Fanhousing04 on high of Fanhousing05 and glue collectively to be used within the LX F-35. Fanhousing07 is a generic housing to be used in different planes.
Video of the aircraft flying:
https://youtu.be/EBGJEyr9wqg
Invoice Of Supplies (could have affiliate hyperlinks):
2x m3x10 mm grub screw for mounting the fan.
2x m3x8 mm countersunk screws for mounting the motor.
3500 kv 2827 motor (for 4S lipos). I take advantage of this motor: https://ebay.us/kV8v5o
Fanhousing04-75mm.STL – Ahead housing with bell mouth consumption for the LX F-35.
Fanhousing05-75mm.STL – Aft housing for the LX-35 with mounting lugs.
Fanhousing06-75mm.STL – Motor mounting plate for the EDF housing.
Fanhousing07-75mm.STL – Generic housing for common use (not F-35) with mounting lugs.
EDF08-75mm-low.STL – Low pitch fan that I used with my setup.
EDF09-75mm-low.STL – Excessive pitch fan for experimentation.
3D printing settings
EDF08-75mm and 09-75mm ought to ideally be printed from a powerful and warmth resistant materials like GreenTec Professional Carbon. PLA is robust sufficient however the motor shaft can get heat sufficient to make the fan slip off if PLA is used. Settings: 7 perimeters, 6 high and 6 backside layers with 100% infill.
Fanhousing06-75.stl ought to be printed with 100% infill and from a warmth resistant materials.
Fanhousing 04, 05 and 07 might be printed from PLA.
3D printer file data
-
Design quantity:
1171782 -
3D design format: STL
Folder particulars
Shut
- EDF08-75mm-low.STL
- EDF09-75mm-high.STL
- Fanhousing04-75mm.STL
- Fanhousing05-75mm.STL
- Fanhousing06-75mm.STL
- Fanhousing07-75mm.STL
-
Publication date:
2023-04-16 at 15:24
License
CULTS – Non-public Use
Tags
Finest 3D printer information of the Varied class
Finest sellers of the class Varied
Would you prefer to help Cults?
You want Cults and also you wish to assist us proceed the journey independently? Please observe that we’re a small crew of three folks, due to this fact it is rather easy to help us to keep the exercise and create future developments. Listed below are 4 options accessible to all:
-
ADVERTISING: Disable your banner blocker (AdBlock, …) and click on on our banner adverts.
-
AFFILIATION: Make your purchases on-line by clicking on our affiliate hyperlinks right here Amazon.
-
DONATE: In order for you, you may make a donation by way of Ko-Fi 💜.
-
WORD OF MOUTH: Invite your folks to come back, uncover the platform and the magnificent 3D information shared by the neighborhood!
