That includes a sturdy carbon fiber true-X Toothpick-style body with strengthened arms, compact dimension, and pleasant price ticket, the brand new Happymodel Bassline appears to be an important FPV coach drone for newbies. The design thought was initially born in 2019, impressed by pilot Nathan Loopz.
For learners, flying an FPV drone for the primary time is an thrilling however daunting expertise since the potential for crashing their quadcopter is extra possible. For this reason I like to recommend don’t spend an excessive amount of for the first quadcopter. The Happymodel Bassline is priced at simply US$132.99 at Banggood with a built-in ELRS SPI radio reciever.
Don’t let the small dimension of this FPV quad deceive you as a result of it’s fairly a performer. It’s extremely gentle and has highly effective motors, making it tremendous agile within the air.
Happymodel Bassline key options
- Reinforce Toothpick model carbon fiber body with a protecting cover;
- 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTX;
- Assist ELRS V3.0 (Must improve firmware)
- Highly effective EX1103 KV11000 motors;
- Excessive-quality FPV system CaddxFPV Ant FPV digital camera + 400mW VTX
- 2S LIPO suitable (350mah/450mah/550mah/650mah recomanded. Battery tray dimension: max 17mm width and 13mm peak.
Technical specs
| Motors | Mode: EX1103 KV11000 Configu-ration:9N12P Stator Diamter:11mm Stator Size:3mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm Weight(g):3.8g No.of Cells(Lipo):1-2S |
| Propellers | Weight:0.88g Materials: PC Pitch:2.3inch Props Dia:52.17mm Middle Thickness:5mm Middle Gap Dia:1.5mm |
| Flight controller | X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Goal: CRAZYBEEF4SX1280
X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver Goal: CRAZYBEEF4FR X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Goal: CRAZYBEEF4FS X12 PNP V1.1 flight controller with out onboard receiver Goal: CRAZYBEEF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Constructed-in Betaflight OSD(SPI Management) Constructed-in present sensor |
| Onboard 4in1 ESC | Energy provide: 1-2S LiPo/LiPo HV
Present: 12A steady peak 15A (3 seconds) Assist Bluejay firmware |
| Onboard SPI ExpressLRS 2.4GHz Receiver | Packet Price choice: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware model: V2.0 Antenna : SMD antenna Receiver protocol: SPI ExpressLRS Suitable with ExpressLRS V2.0 TX Module Couldn’t flash individually ExpressLRS firmware May flash FC firmware to assist ExpressLRS v3.0 TX module |
| Onboard SPI Frsky D8/D16 receiver Model | SPI BUS receiver Frsky D8/D16 suitable Suitable Non EU transmitter D8/D16 modelChannels: 8ch/16ch No floor interference ( Transmitter and receiver 1 m from the bottom): 200meterFailsafe assist |
| Onboard SPI Flysky receiver Model | PI BUS receiver Protocol: AFHDS-2A Channels: 14ch(AFHDS-2A) No floor interference ( Transmitter and receiver 1 m from the bottom): 200meter Failsafe assist |
| PNP Model
(with out onboard receiver) |
Full UART1 for exterior Receiver Assist CRSF/GHOST/SBUS/IBUS/DSMX protocol IR1 pad(invert RX1) used for SBUS enter |
| Onboard 5.8g OPENVTX | Firmware model: OPENVTX Smartaudio v2.1 PIT Mode assist RCE Mode assist Channels:48ch Transmitting Energy: 0/RCE/25mw/100mw/400mw Energy provide: DC 5V Present (5v): <650ma (400mw) |
| Caddx ANT 1200tvl digital camera | Picture Sensor: 1/3″ CMOS Sensor Horizontal Decision: 1200 TVL TV System: NTSC or PAL IMAGE: 16:9 or 4:3 Synchronization: Inner Digital Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: 0.001Lux@F1.2 Auto Acquire Management: YES WDR: World WDR DNR: 3D DNR Dimensions: 14*14mm(with bracket to 19*19mm) Broad Energy Enter: DC 3.7-18V Weight: 2g (N.W.) |
