iFlight is the newest FPV drone model that joined the ExpressLRS platform. The iFlight ELRS RX is out there with two frequency choices: 2.4 GHz and 868/912 MHz. Will the upper frequency model present an extended vary, the decrease frequency version has higher penetration for flying between buildings and different obstacles.
The iFlight ExpressLRS 2.4G RX comes with 4 antenna choices. For small builds, you may go for an onboard ceramic antenna and bigger FPV quads for 40mm, 70mm, or 220 T-type antenna. The iFlight ELRS 868/912MHz RX is out there with solely two antenna choices: 40mm and 70mm.
iFlight claims that they in all probability achieved the market’s finest crystal frequency stability at a really low-frequency deviation (solely 11KHz in whole at 51.99976MHz on the crystal). Because of native laws, the 915MHz FCC area appears to have a greater efficiency than the 868MHz EU area. The 2400MHz band works nice in any area and has a better packet charge of as much as 500hz. This isn’t a typical 2400MHz protocol and can’t be in comparison with something prior in the marketplace.
Key options
- Improved circuit design
- Market’s lowest crystal frequency deviation (low packet loss, high-frequency stability)
- Excessive-performance at 2400MHz or 900MHz (915 / 868 bands obtainable)
- Frequency-tuned T-style dipole and SMD antenna choices
- Pre-soldered SH1.25 connector with 30mm wire size (Plug&Play for straightforward set up with iFlight FCs)
Technical parameters
- Antenna connector: IPEX(868MHz/915MHz/2.4G) / Molex 479480001 SMD antenna(2.4G w/SMD antenna)
- Firmware: ExpressLRS iFlight 900RX(868MHz/918MHz) / ExpressLRS iFlight 2400RX(2.4G)
- Frequency bands: 868MHz EU/915MHz FCC and a pair of.4GHz ISM
- Telemetry Energy: 17dbm (868/915MHz) / 20dbm（2.4G
- Connector: SH1.25, together with 30mm wire (pre-soldered)
- Pinout: 5V GND RX TX
- Enter voltage: 5V
- Protocol: CRSF
- Dimension: 12*19.5mm
- Weight: 1.2g
