3D printers are like mud magnets; in the event you don’t cowl them with one thing in just a few days, they are going to be lined by a wonderful layer of particles. Shifting components are greased with vaseline, from which the filth is troublesome to take away. The SUNLU 3D Printer Enclosure presents glorious safety towards mud and water and supplies the fixed temperature required for filaments similar to ABS and CF. Additionally, enclosed 3D machines are typically much less noisy and smelly.
The inside of the SUNLU 3D Printer Enclosure has aluminum foil padding that resists temperatures as much as 800°C. The fireproof flame-retardant materials avoids unintentional fireplace and unfold.
There may be NO common housing for all sorts of printers, however SUNLU’s tent can be utilized with most 3D printers with heat-bed sizes smaller than 235*235mm. It’s suitable with Creality, Elegoo, Artillery, Anycubic, and different 3D printer manufacturers. The enclosure is designed for FDM 3D printers however will also be used for resin LCDDLP machines.
SUNLU 3D Printer Enclosure Overview
Disclosure: I obtained this 3D cupboard as a part of a product assessment collaboration with SUNLU. Product specs and high quality could differ based on the producer’s reliability, so I can not assure that you’ll get merchandise that carry out the identical as in my article.
The 3D printer enclosure from SUNLY is packed in a compact cardboard field. The scope of supply contains 24 assist rods, 12 phase couplers, eight plastic corners, and the duvet. A form of consumer guide can also be supplied that can assist with the meeting half.
The white fiberglass rods are packed by measurement. Every bag of the three accommodates eight segments. The longest ones give the peak of the tent, the center ones the depth, and the shortest ones the width. When it’s totally assembled, the enclosure measures about 25.6×21.6×29.5 inches (550×650×750mm).
The duvet has a big zipped flap. When totally opened, it provides entry for loading the printer from the highest or entrance. The flap has a clear window that lets you peek contained in the tent with out opening the “door”. It has a small storage pocket on the precise aspect for small instruments and a zipped “upkeep” window, permitting you to function the printer from the other aspect. On the again is a rubber-sealed gap for the facility cable. No gap for an exterior air exhausting/air purifier system.
SUNLU advertises that the case is fireproof as a result of aluminum layer inside. It’s exhausting to imagine that an open fireplace can be saved contained in the tent. To not point out that the nylon entrance window shouldn’t be protected by something. For me, the aluminum foil works solely as a warmth reflector to maintain it inside at a continuing temperature and scale back warmth loss.
Placing all of it collectively and testing it!
To be packable in a small field, every phase is fabricated from two stable fiberglass rods utilizing a plastic coupling. After you couple them, you’ll get twelve lengthy segments that have to be connected utilizing the nook joints (see picture beneath).
Subsequent, unzip the material cowl and cargo the oblong prism body. Do it gently; you don’t wish to break the plastic joints. It didn’t take me greater than quarter-hour to assemble it utterly, and you are able to do it your self with none assist.
My Elegoo Neptune 3 Professional suits comfortably contained in the enclosure. There was sufficient room inside to maneuver the print mattress (X-axes) and cargo the filament spool on prime of the machine.
I did the primary check utilizing ABS filament that required a 250°C nozzle, a 70°C platform, and a really useful chamber temperature between 60-70°C. After a 30-minute warm-up time contained in the enclosure, the utmost temperature reached was 38 °C, which isn’t unhealthy contemplating that the room temperature was round 23 °C. When the three-hour print job was completed, the inside temperature rose one other 4 levels to 42°C. Keep in mind, when printing ABS, turning off the half cooling fan to maximise layer adhesion is really useful.
The SUNLY enclosure decreased the noise by about 5 dB, which isn’t a lot, however it’s nonetheless quieter than with out it.
SUNLU 3D Printer Enclosure: Key Takeaways
- [Wide 3D printer compatibility – One size fits most] Measuring 25.6×21.6×29.5 inches (550×650×750mm), it’s suitable with most 3D machines with a heat-bed measurement smaller than 235*235mm such because the SUNLU T3, Creality Ender 3/3 Professional/3 V2/3 S1/3 S1 PRO, Elegoo Neptune 3/3 Professional, Neptune 4/4 Professional, Anycubic Kobra 2 PRO, Anycubic Mega Professional, Artillery 3D Sidewinder X3 Professional, MINGDA Magician X, and lots of different fashions
- [Constant and Homogeneous temperature] The enclosure retains a continuing temperature within the 3D printing setting, considerably bettering 3D prints, particularly ABS filaments. Retains 3D prints and printers heat in a chilly room.
- [Multiple Protection] Waterproof glass cloth fabric avoids the moisture results on 3D printing high quality. Aluminum foil inside resists 600°C-800°C holds warmth safely. Fireproof flame-retardant materials avoids unintentional fireplace and unfold. Separate area avoids mud, which impacts the printing high quality. The enclosure additionally tremendously helps with the filament’s odor when heated at excessive temperatures.
- [User-friendly Design] The SUNLU 3D Printer Enclosure has a visual viewing window that lets you observe the 3D printing course of. On the left is a storage pocket of 8.27inch*7.48inch for 3D printer instruments and equipment. A Velcro flip-up working window on the precise aspect permits entry to the 3D printer with much less warmth loss.
- [Easy to Assemble and Sturdy] Straightforward to assemble and take away with clear directions. It takes 5 minutes of fast set up with no further instruments required —a sturdy construction with fiberglass rods.
Value and availability
This 3D printer protecting tent will be ordered from SUNLU for less than $33.99 with 44% off throughout their spring sale. SUNLU additionally has an even bigger model of its protecting cowl that measures 27.5*29.5*35.4 inches (700x750x900mm), and it’s only $4 dearer on Amazon.
Is there any draw back to utilizing the SUNLU enclosure?
Placing your 3D printer in an enclosure has many advantages but in addition some downsides. The largest drawback of enclosing a 3D printer with no filtration system is the elevated focus of dangerous fumes. COV and nanoparticle ranges can rapidly rise to poisonous ranges.
If you happen to’re utilizing PLA filaments, the excessive temperature across the printer could cause critical layer adhesion points -in excessive circumstances, layers can collapse as a result of the highest layer stays too sizzling, and the subsequent layer can’t follow it.
One other drawback could possibly be that the enclosure is considerably bigger than the printer itself, and you will have an even bigger desk to function the machine.
SUNLU 3D Printer Enclosure: What are the most effective options in your cash?
It’s a very large provide of 3D printer enclosures with completely different sizes and functionalities. Costs begin at $29.99 and might go as much as a number of hundred {dollars}. The Official Creality Ender 3D Printer Enclosure has comparable options and virtually resembles this SUNLU. There are dearer fashions with a built-in LED mild or exhaust fan to vent out the odor, such because the FUNGDO Multifunctional 3D Printer Tent. The DELACK 3D Printer Enclosure Equipment makes use of plexiglass panels as an alternative of material, giving full visibility contained in the body.
If you happen to don’t wish to pay for an enclosure otherwise you don’t discover one that matches your machine, you may construct one.
