Have you ever ever misplaced your FPV drone in a discipline or a dense space? Discovering it with out a beeper generally is a daunting activity. Fortunately, there’s a nifty function known as DShot Beacon that makes use of your motors as beepers. On this article, I’ll stroll you thru the best way to arrange DShot Beacon in Betaflight.
What’s DShot Beacon?
DShot Beacon is a function that enables your drone’s motors to make a beeping sound identical to the startup chant you get while you first plug within the battery. In the event you don’t have an exterior beeper put in in your FPV drone, having DShot Beacon setup will make it simpler to find your drone when it’s misplaced. The setup course of is simple, however there are a couple of key steps you could comply with to make sure it really works accurately.
Warning: operating motor beeper for too lengthy may lead to motor overheat, even burns out your motors in excessive instances. Keep away from setting beeping quantity too excessive and scale back the beeping frequency to scale back the possibility of burnt motors.
{Hardware} Necessities
Earlier than diving into the setup, guarantee your ESCs (Digital Velocity Controllers) assist DShot ESC protocol. If they’re operating the next firmware, they need to assist DShot Beacon:
- Bluejay
- AM32
- BLHeli_S
- BLHeli_32
In case your ESC solely assist PWM, Oneshot and Multishot however doesn’t assist DShot, then DShot Beacon received’t work.
A bit out of subjects, when you’ve ever questioned how ESC’s could make sound, they don’t. The sound is definitely coming from the motors, which the pitch and quantity of the sound is managed by sign from the ESC. It’s even doable to play a jingle with motors at startup: https://oscarliang.com/blheli-32-custom-startup-tone-music/
Setting Up DShot Beacon
Betaflight Configuration
Connect with Betaflight Configurator: Join your flight controller to your pc and open Betaflight Configurator.
Choose DShot Protocol: Navigate to the Configuration tab. Below “ESC/Motor Options,” choose the suitable DShot protocol relying on what PID Loop Frequency you’re operating:
- For 2KHz or 1.6KHz, select DShot150.
- For 4KHz or 3.2KHz, select DShot300.
- For 8KHz, select DShot600.
Allow DShot Beacon: Scroll right down to the “DShot Beacon Configuration” part. Allow RX_LOST, RX_SET, or each.
- When RX_SET is enabled, motors will beep while you activate the beeper change.
- When RX_LOST is enabled, motors will beep when the drone loses radio connection.
When each choices are disabled, DShot Beacon is successfully disabled. When the drone is armed, DShot Beacon is disabled.
Select Beacon Tones: You possibly can choose one of many 5 accessible beacon tones. Though the sound doesn’t change considerably, having completely different tones might be helpful for differentiation. Word that setting it to 0 will disable motor beeper. I usually decide quantity 3.
Beeper Configuration: Additional down within the Configuration tab, you’ll discover “Beeper Configuration.” Whilst you don’t have to alter these settings, you may customise them to your choice. A professional tip is to disable the USB beeper when you have an exterior buzzer to forestall it from beeping each time you hook up with Betaflight.
Save and Reboot: After making these adjustments, click on “Save and Reboot.”
Setting Up Beeper Mode
Modes Tab: Go to the Modes tab in Betaflight Configurator. Right here, you’ll arrange a change in your transmitter to activate the beeper mode. In the event you need assistance with organising Modes tab, I’ve a tutorial right here: https://oscarliang.com/betaflight-modes/
Disable the choice “Conceal unused modes” to show all of the accessible modes.
Add Vary: Discover “Beeper” and click on “Add Vary.” Assign it to an AUX change in your transmitter. For instance, I exploit AUX 3 (Channel 7) for Beeper.
Configure Swap Vary: Set the change vary for the beeper to the specified place. I want setting it on the finish of the change vary, guaranteeing it’s solely activated when the change is absolutely down.
Save Settings: Click on “Save” to use your settings.
Sensible Use Case
Think about your drone is misplaced in a bush and you may’t see it. By activating the beeper, the motors beeping will allow you to find the drone. For small drones, the beeping may not be very sturdy as a result of the motors are fairly tiny, on this case, it’s also possible to attempt arming and disarming instantly to make some extra noise and motion. Don’t arm it for too lengthy if the props are obstructed whereas armed, you can burn the motors.
Adjusting Beeping Quantity and Delay
You possibly can alter the DShot Beacon quantity within the ESC configuration instrument, on this instance, BLHeliSuite:
- Beacon Power: how loud you need the motors to sound (default 80, vary from 1 to 255); as much as 120 are good values IMO. Attempt completely different values and test if the motors and ESC would get too sizzling over a time period. I don’t advocate setting this too excessive to forestall motors and ESC overheat.
- Beacon Delay: This can be after how lengthy the motors begins to beep when being idle. It’s helpful in case you can’t activate beeper out of your radio, so the motors begin beeping mechanically. Nonetheless it may very well be annoying when you find yourself simply organising your quad on the bench (default is 10 minutes, I believe lowering it to five minutes is a good suggestion).
Word that there’s additionally Beep Power, which could appear appear related however really it has nothing to do with DShot Beacon. It solely controls the quantity of the start-up chant, we usually simply go away it on the default 40.
Conclusion
Organising DShot Beacon is an easy course of that may prevent a number of time and frustration. By following the steps outlined above, you should utilize your drone’s motors as efficient beepers. Whether or not you’re a newbie or an skilled pilot, this function is a beneficial addition to your FPV toolkit.
Edit Historical past
- Jun 2017 – article created
- Jul 2024 – Information rewritten for Betaflight 4.5
