The right way to Flash, Replace and Configure AM32 ESC (Backup & Restore Settings)

Guaranteeing your ESC firmware is updated is essential for optimum efficiency and bug fixes. On this tutorial, I’ll present you find out how to flash and replace AM32 ESCs, serving to you get pleasure from a clean flying expertise.

A few of the hyperlinks on this web page are affiliate hyperlinks. I obtain a fee (at no additional price to you) in case you make a purchase order after clicking on one in every of these affiliate hyperlinks. This helps assist the free content material for the group on this web site. Please learn our Affiliate Hyperlink Coverage for extra data.

Observe: In case your ESC presently has BLHeli_32 and also you want to flash AM32 to it, the flash course of is extra complicated as it’s important to set up the AM32 bootloader first. You’ll find detailed directions right here: https://oscarliang.com/flash-am32-blheli32-esc/. In case your ESC is already operating AM32 firmware, comply with the steps on this information to replace/flash it.

Additional Readings:

I’ve been utilizing AM32 ESCs for some time now, and the flashing and updating course of has been clean. The configurator is user-friendly, and the flexibility to again up and restore settings is handy.

The place to Get AM32 Configurator

The AM32 Configurator is an internet software you’ll use to flash, replace, and configure your AM32 ESCs. No obtain or set up is required. Simply go to: https://am32.ca/

Within the high heart menu, choose the ‘Configurator’ tab.

Connecting to AM32 Configurator

Warning: Be sure that to take away all propellers when powering up your drone on the bench, simply in case the motors spool up by chance.

Right here’s find out how to join your AM32 ESC to the configurator:

1. Join FC to Pc: Use a USB cable to attach your flight controller to your pc.
2. Energy Up Your ESC: Plug in a battery to the drone (with out props).
3. Entry the Configurator: Open AM32 Configurator.
4. Choose the Port: Click on the inexperienced button within the high proper nook and choose the flight controller’s COM port linked to your PC.
5. Join and Learn Settings: Hit the inexperienced join button, then click on ‘Learn’ to load the settings out of your ESC. This course of will show all of the linked ESCs.

Getting Error: error – ACK_D_GENERAL_ERROR? Be sure that your ESC is powered by plugging in a battery.

Flashing Firmware

To replace the firmware in your AM32 ESC, comply with these steps:

1. Flash Firmware: Click on the ‘Flash Firmware’ button. A dialog field will seem.
2. Choose ESC and Model: Relying in your ESC, the second subject may auto-populate with the ESC model. Select the firmware model you wish to flash, usually the newest model.
3. Choose ESCs to Flash: Verify the numbered packing containers for the ESCs you wish to replace. Simply choose all 4 packing containers to flash all 4 ESCs.
4. Begin Flashing: Click on the ‘Begin Flash’ button. The method will start and flash the chosen ESCs. It takes about 5 minutes to flash a 4-in-1 ESC.

Observe: In case your ESC doesn’t auto-populate, you’ll be able to tick the ‘Ignore present MCU format’ field, seek for your ESC manually, and proceed with the flashing. This can be a workaround for older firmware variations.

Configuring ESC Settings

Right here’s find out how to alter your ESC settings:

1. Entry Settings: As soon as linked, you’ll see 4 packing containers, representing each ESC.
2. Choose All ESC: Guarantee all ESCs are chosen by clicking the packing containers. When chosen, the field border ought to flip inexperienced; when not chosen, the field border is gray.
3. Reverse Motor Course: If a motor spins within the fallacious path, you’ll be able to reverse it by ticking the ‘Reversed’ field for the corresponding ESC.
4. 3D Mode: Don’t test 3D mode until you wish to fly 3D, which permits the motors to alter path mid-flight.
5. Configurations Defined: I’ve a complete tutorial explaining what every setting does. Hyperlink: coming quickly.
6. Crimson Field Border: After getting modified a setting and haven’t saved it, the field border might be pink. As soon as the settings are saved, the field border will grow to be inexperienced.
7. Save Adjustments: After making changes, click on the blue ‘Save’ button to use the adjustments (NOT the Save Config button).

Backing Up and Restoring Configurations

It’s good observe to again up your ESC configurations earlier than updating to a brand new model or making any important adjustments:

1. Save Configuration: Click on ‘Save Config’, choose the ESCs you wish to again up, and obtain the backup file (.bin format).
2. Load Configuration: To revive a configuration, click on ‘Apply Config’, choose the saved bin file, and apply it to the ESCs.

Conclusion

Flashing and updating your AM32 ESCs may appear daunting, but it surely’s fairly simple with the appropriate instruments and steps. The AM32 configurator gives a user-friendly interface for managing your ESC settings successfully. Whether or not you’re a newbie or an skilled pilot, having up to date and well-configured ESCs will improve your flying expertise. So, dive in, replace your ESCs, and benefit from the clean, dependable efficiency of your FPV drones.