STL file Double magnetic cube / double magnetic cube・3D print object to obtain・Cults

Easy, very helpful and really simple to print and assemble!

Neglect about cube that get misplaced whenever you roll them, do not present up whenever you want them or all the time give the identical numbers!

Very simple to print and assemble, you solely want 14 4 x 2 mm neodymium magnets.

You can too use a 6 mm extensive by 63 mm lengthy bolt and its nut. However to make issues a lot simpler for you it already comes included to print it and it really works completely.

I hope you prefer it and discover it helpful.

Should you just like the design, prefer it. You probably have any ideas, do not hesitate to remark. And in order for you extra designs like this, observe me!

3 perimeters

4 higher layers to keep away from gaps

15% filler

The holes for the magnets have already got a 0.2 mm clearance, so relying on the calibration of the printer, it could be obligatory to attach them in. In my case I solely needed to glue them, as the remaining went in completely and not popped out.

The construction has holes to place bits of filament, which is able to function a information when gluing the items.

It’s essential to pay shut consideration when putting the magnets, in order that those on the bottom entice those on the wheels, which makes it brake within the appropriate place, to point a quantity.

The easiest way is to put those on the wheels first (all with the poles in the identical route) and on the time of meeting, depart a number of magnets connected to the wheel and with the identical stack of magnets, place the one on the corresponding base. in one of many pictures is best defined (I’ll add it quickly as I’ve to make the gif of the video).